Ruckus Wireless ZoneSwitch 4124 User Manual Download Page 105

Page: 105 / 410

Graphical User Interface

Ports

Port Mirror

Ports > Basic Port Config > Port Mirror

The Port Mirror menu item enables or disables port mirroring and configures and displays
port monitoring settings.

Mirroring Status

■

Status:

Enables or disables (default) port mirroring on the system.

Monitoring Config

■

Monitoring Port:

Sets the monitoring port.

■

Monitored Port:

Sets the port to be monitored.

■

Direction:

Sets the data transmission direction to monitor. Default RX (receiving).

Monitoring Table:

Displays a list of monitored ports and the data direction being

monitored. This feature also allows you to delete (remove) monitoring from a port.

Summary of Contents for ZoneSwitch 4124



























































































































































































































































































































































































































Search results

Summary of Contents for ZoneSwitch 4124

Reviews:

Related manuals for ZoneSwitch 4124

Brands by name

Popular brands

Ruckus Wireless ZoneSwitch 4124, User Manual

Search results

Summary of Contents for ZoneSwitch 4124

Reviews:

Related manuals for ZoneSwitch 4124

Brands by name

Popular brands