Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 250 / 410

236
Command Line Interface
Multiple Spanning Tree Commands
Multiple Spanning Tree Commands
Multiple Spanning tree protocol (STP) Commands ensures a loop-free topology for any
bridged LAN. Therefore preventing bridge loops and ensuing broadcast radiation.
spanning-tree mst enable
Enables or disables spanning trees. Disabled by default.
Command Mode: Global Configuration
Syntax
[no] spanning-tree mst enable
Example
!Enables the multiple spanning tree protocol.
Switch(config)# spanning-tree mst enable
Switch(config)#
!Disables the multiple spanning tree protocol.
Switch(config)# no spanning-tree mst enable
Switch(config)#
spanning-tree mst config-id
Specifies a multiple spanning tree protocol configuration ID. Default is 0.
Command Mode: Global Configuration
Syntax
spanning-tree mst config-id <id>
Description
■
<id>
- Specifies the MST ID.
Example
switch(config)#
spanning-tree mst config-id
2
switch(config)#