Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 260 / 410

246
Command Line Interface
Multiple Spanning Tree Commands
spanning-tree mst cost
Configures port path cost.
Command Mode: Interface Configuration
Syntax
spanning-tree mst cost <cost>
Description
■
<cost>
- Specifies port path cost. May be an integer from 1 to 200000000. Default is
auto detected from port speed; 20000 for Gigabit..
Example
!Sets port 4 path cost to 4000.
Switch(config)#
interface
GigabitEthernet 1/4
Switch(config-if)#
spanning-tree mst cost
4000
Switch(config-if)#
spanning-tree mst init-migration
Initiates protocol migration on a port.
Command Mode: Interface Configuration
Syntax
spanning-tree mst init-migration
Example
!Initiates port migration on port 4
Switch(config)#
interface
GigabitEthernet 1/4
Switch(config-if)# spanning-tree mst init-migration
Switch(config-if)#