POWERFLL CL.
A
(3)
Repeat steps 1 and 2 to display only the group of print heads that requires cleaning.
Only the displayed groups will be cleaned. If A and B are displayed, they will both be cleaned.
9.
Press [ENTER] to confirm your entry.
The screen shown below appears, and then cleaning starts. The (approximate) remaining time for the pro-
cedure is displayed on the screen. (The display shown below is an example. "01:45" = "1 minute and 45
seconds")
CLEANING...
>> 01:45
When finished, the screen shown below appears again.
POWERFULL CL.
AB
10.
Press [
◀
] several times to display the screen shown below.
CLEANING
POWERFUL CL.
11.
Press [
▼
] several times to display the screen shown below.
CLEANING
TEST PRINT
12.
Press [ENTER].
Perform a printing test again to check whether the dot drop-out and dot displacement have been correct-
ed.
MEMO
• If the problem persists, try performing powerful cleaning again.
• This cleaning can be effective when carried out periodically, according to the frequency of use.
• If problems such as dot drop-out and dot displacement persist even after you have performed powerful cleaning sev-
eral times, perform "manual cleaning."
P. 140 "Manual Cleaning Method"
When Normal Cleaning Is Not Effective
138
2. Regular Maintenance
Summary of Contents for TrueVIS VF2-640
