Accurately Adjusting the Misalignment of the Ink Landing Position
This adjusts the misalignment of the ink landing position.
This adjustment must be performed in the following cases.
• When using this machine for the first time
• When changing the media to use
• When you have changed the print-head height
• When printing is not improved by performing [MEDIA GAP ADJ. SIMPLE SETTING] (
"Adjusting the Misalignment of
the Ink Landing Position(P. 69)"
Procedure
1.
Press [MENU].
2.
Press [
▼
] several times to display the screen shown below.
MENU
MEDIA GAP ADJ.
3.
Press [
▶
], then [
▲
] to display the screen shown below.
MEDIA GAP ADJ.
DETAIL SETTING
4.
Press [
▶
] to display the screen shown below.
DETAIL SETTING
TEST PRINT
5.
Press [ENTER].
Printing of the test pattern starts.
6.
When printing is finished, press [
▼
], then [
▶
] to display the screen shown below.
H1 H2 H3
0 0 0
7.
View the printed test pattern, and then determine the correction values from "MEDIA GAP ADJ. NO.1 H1" to "ME-
DIA GAP ADJ. NO.1 H4."
Select the value that gives the least misalignment between the two lines. In the case of the following
figure, select "+5" for H1 and H3 and "+4" for H2 and H4. When you cannot choose between two sequen-
tial numbers, select a value that is between them (you can set correction values in units of "0.5").
What to Do First after Installation
2. Basic Operations
39
Summary of Contents for TrueVIS VF2-640
