3.
Adjust the print head height.
Procedure
1.
Press [
◀
] to select "CHANGE."
HEAD HGT LOW
[CHANGE] NEXT
2.
Press [ENTER] to confirm your entry.
You can select "NEXT" and press [ENTER] to skip the current menu and proceed to the next menu.
3.
When the following screen is displayed, open the front cover.
HEAD HEIGHT
LOW LOW
4.
Move the height-adjustment lever to adjust the head height.
When you change the position of the height-adjustment lever, the display screen changes and the buzzer
sounds at the same time.
Position
Display screen
HIGH
HEAD HEIGHT
LOW HIGH
MIDDLE
HEAD HEIGHT
LOW MIDDLE
LOW
HEAD HEIGHT
LOW LOW
MEMO
• Normally move the height-adjustment lever to "LOW." For media that is wrinkled or comes loose from the platen,
move the height-adjustment lever to "MEDIUM" or "HIGH."
• The printing quality degrades as the distance between the media and the print heads increases. Do not move the
height-adjustment lever to "MEDIUM" or "HIGH" needlessly.
5.
Close the front cover.
Printing Output
58
1. Printing Method
Summary of Contents for TrueVIS VF2-640
