Roland TrueVIS VF2-640, User Manual

Page: 34 / 208

IMPORTANT
Be sure to use the media clamps when you load media.
If you attach the media clamps directly before printing after the media setup is complete, the machine may print on the
media clamps.
MEMO
Press down on the bent part of the media clamps to lift up both of their edges. Move the media clamps to the left and
right with both edges lifted up.
10.
Close the front cover.
11.
Press [ENTER].
When you press [ENTER], the print-head carriage moves and detects the width of the media. This opera-
tion is called initialization. When initialization ends, [SETUP] on the operation panel lights, and the printa-
ble width is displayed on the screen. This completes the setup of the media.
IMPORTANT
Remove when not using roll media.
Do not leave roll media loaded on the machine for a long period of time. Be sure to remove and store the media when
not in use. Leaving the roll media loaded on the machine for a long period of time will cause the media to sag, which may
deteriorate the printing quality and may also lead to motor errors.
Setup of Media
2. Basic Operations
33