Roland TrueVIS VF2-640, User Manual

Page: 198 / 208

Before moving the machine, dispose of the discharged fluid and secure the print-head carriage in place. Attempt‐
ing to move the machine without first performing these preparations may result in damage to internal compo-
nents due to leaking ink or damage to the print heads.
IMPORTANT
• Once the preparations for moving the machine are complete, move the machine promptly and turn on the machine as soon as
possible after the machine is relocated. If you leave the machine alone without turning it on, the precipitated ink will coagulate
and result in problems such as the clogging of the print heads.
• When moving the machine, keep it at a temperature from 5 to 40°C (41 to 104°F) and at a humidity from 20 to 80% (with no
condensation). Failure to do so may result in a breakdown.
• Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it from striking other ob-
jects.
• After the printer is reinstalled, the media holder adjuster must be adjusted by a suitably qualified worker. This work must be
performed by a Roland DG Corporation worker. Contact your authorized Roland DG Corporation dealer.
Step 1: Removing the Media
Procedure
1.
Remove any media.
If any media has been loaded, remove it.
If no media is loaded, raise the loading lever.
Preparing to Move the Machine
1. Operations When Moving the Unit
197