Roland TrueVIS VF2-640 User Manual Download

Page: 144 / 208

IMPORTANT

Be sure to use one of the included cleaning sticks.

Clean the locations shown in the following figure.

Be especially careful to clean away any fibrous dust (lint).

When you have finished cleaning, move the print-head carriage to above the platen.

Move it by pushing the position indicated with in the following figure.

CAUTION

When moving the print-head carriage by hand, be sure to push the specified posi-

tion.

Moving it by pushing positions other than that specified may deform and damage the cover.

Attach the cut rail.

Manual Cleaning

2. Regular Maintenance

143

Summary of Contents for TrueVIS VF2-640

















































































































































































































Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands

Roland TrueVIS VF2-640, User Manual

Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands