Roland TrueVIS VF2-640 User Manual Download

Page: 163 / 208

Preparation is complete once the following screen is displayed.

FINISHED?

IMPORTANT

Do not press [ENTER] at this stage. Press [ENTER] after replacing the wipers and the tray pads. If you press [ENTER] at this

stage, close the right cover according to the instructions on the screen, wait for the following screen to be displayed, and

then press [ENTER] again.

MAINTENANCE

REPLACE WIPER

Touch the location shown in the figure to discharge any static electricity.

10.

Replace the wipers.

(1)

Detach the old wipers.

Using the tweezers, unhook the wipers, and then pull them up. Using the tweezers to press on the

hook in the hole on the wiper makes it easier to remove the wiper.

(2)

Attach the new wipers.

Place the inclined end of the wiper on the back side of the machine. If the wiper is installed with the

incorrect orientation, appropriate cleaning will not be possible.
Be sure to attach the wipers to the hooks. Failure to do so may result in dot drop-out or other prob-

lems.

Replacing Parts for Maintenance

162

4. Replacing Consumable Parts

Summary of Contents for TrueVIS VF2-640

















































































































































































































Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands

Roland TrueVIS VF2-640, User Manual

Search results

Summary of Contents for TrueVIS VF2-640

Reviews:

Related manuals for TrueVIS VF2-640

Brands by name

Popular brands