manualshive.com logo in svg

Roland TrueVIS VF2-640, User Manual

Share
Download
Roland TrueVIS VF2-640 User Manual Download Page 174

Have you tried mixing the ink by shaking the pouch trays?

If colors are uneven, remove the pouch trays, and then shake them gently.
If uneven color issues with white ink are not resolved even after shaking the pouch trays to mix the ink, perform

"damper cleaning."
If uneven color issues with ink other than white ink (C, M, Y, K, Lc, Lm, Lk, Or, or Gr ink) are not resolved even after

shaking the pouch trays to mix the ink, perform super cleaning.

 RELATED LINKS 

・

  P. 147 "Mixing the Ink by Shaking the Pouch Tray"

・

  P. 149 "Damper Cleaning Method"

・

  P. 152 "Super Cleaning Method"

Is the media wrinkled?

If the media is wrinkled and comes loose from the platen, colors may be uneven or the printing quality may suffer.

 RELATED LINKS 

・

  P. 27 "Setup of Roll Media"

・

  P. 34 "Setup of Sheet Media"

Was printing paused partway through?

When printing is paused, the coloring at the seam may be altered when printing resumes. Avoid pausing printing.

Before you perform lengthy printing, check the amount of ink remaining in the ink pouches. Printing may also

pause when data is not sent from the computer quickly enough. We recommend not performing any other tasks

with the computer while printing is in progress.

Is the printer installed in a level and stable location?

Never install the machine in a location where it is tilted or where it may wobble or experience vibration. Also make

sure that the print heads are not exposed to moving air. These factors may lead to dot drop-out or reduced print-

ing quality.

Is the media loaded correctly?

If the media is not loaded correctly or the media feed is not smooth, printing may be adversely affected. Load the

media correctly.

 RELATED LINKS 

・

  P. 27 "Setup of Roll Media"

・

  P. 34 "Setup of Sheet Media"

Are the operating parameters set to appropriate values?

Depending on the settings for such menu items as [FULL WIDTH S] and [PERIODIC CL.], uneven colors may occur. If

the settings have been changed, try restoring them to their default values.

 RELATED LINKS 

・

  P. 99 "Speeding Up Output for Narrow Media"

Colors Are Unstable or Uneven

1. Output Quality Problems

173

Summary of Contents for TrueVIS VF2-640

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands