manualshive.com logo in svg

Roland TrueVIS VF2-640, User Manual

Share
Download
Roland TrueVIS VF2-640 User Manual Download Page 153

Super Cleaning Method

In the following cases, perform "super cleaning."

• If ink discharge issues such as dot drop-out are not corrected after performing cleaning using the cleaning

function (normal, medium, powerful) or manual cleaning.

• If white is uneven even after performing damper cleaning.

P. 149 "Damper Cleaning Method" 

• If colors other than white (cyan, magenta, yellow, black, light cyan, light magenta, light black, orange, or green)

are uneven even after shaking the pouch trays to mix the ink.

P. 147 "Mixing the Ink by Shaking the Pouch Tray" 

IMPORTANT

A large amount of ink will be discharged during super cleaning. Perform this operation only when ink discharge issues such as dot

drop-out, dot displacement, and uneven colors cannot be corrected even after performing cleaning using the other cleaning func-

tions (normal, medium, powerful, manual, and damper cleaning).

 RELATED LINKS 

・

  P. 132 "Printing Tests and Normal Cleaning"

・

  P. 135 "Medium Cleaning Method"

・

  P. 137 "Powerful Cleaning Method"

・

  P. 139 "Manual Cleaning"

1.

 Perform a printing test.

Procedure

1.

Load the media.

P. 27 "Setup of Media" 

2.

Press [FUNCTION].

3.

Press [

▼

], then [

▶

] to display the screen shown below.

CLEANING

TEST PRINT

4.

Press [ENTER].

Printing of the test pattern starts.

5.

Check whether there is dot drop-out or dot displacement in the test pattern.

Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.

Handling Severe Dot Drop-out and Dot Displace-

ment

152

3. Advanced Maintenance

Summary of Contents for TrueVIS VF2-640

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands