7-14
7
Others
Explain to switch off and on the machine and check what happens before calling for inquiry,
when [SERVICE CALL] is displayed. It may solve the problem.
Explain the action to take when the head carriage stops over the platen in reference to the User's Manual
[7-6 The Print Heads Stopped Moving].
If the head carriage doesn't go back to the standby position by turning on the sub power again, it is
necessary to cap the heads by the user.
Consumable Parts and
Replacement Cycle
PARTS NAME
LIFE TIME
Print Head
6 billion shots / nozzle (6,000,000 kshots)
* When the Head is replaced, the Dampers should be replaced at
the same time.
Wiper
6 months or
Wiping 3,000 times or
Ribbing 100 times
*When the cleaning is done for the 500 times, the message for
replacement of the Wiper is shown on the LCD.
Carriage Motor
1,500 hours
Cap Top
6 months
Ink Tube
3,000 hours
Sponge for Flushing
6 months
Sponge for Wiper
12 months
Battery
24 months
Cutter Protection
Replace it depending on degree of scratches on it.
Pinch Roller
Replace it depending on degree of the rubber part wear.
