6
Grit Roller is loose
Fix the Grit Roller
When Grit Roller becomes loose, feeding amount between left and
right edges will be different and results in media shifting.
6-13 MOTOR ERROR
NO
CHECKING POINT
ACTION
REFERENCE
OUTLINE
1
Media Jamming
Remove cause of
Media Jam
When the edge of the media curls or the media absorbs the Ink and
becomes irregular surface of the media, the Print Carriage catches on
the media during printing and results in the Motor Error.
2
Media is too heavy
Use appropriate Media
When the adherence of the media is strong or the media weight is
more than 30kg, the Motor Error occurs due to the too much load for
feeding the media.
3
There is a dirt in teeth of
Drive Gear
Clean Drive Gear
When there is dirt in the teeth of the Drive Gear and it cannot rotate,
the Motor Error occurs.
4
Broken/life of the Motor
Motor replacement
[3-5 CARRIAGE
MOTOR
REPLACEMENT]
When the Motor is broken or reaches its life, the Motor cannot obey
the order from the CPU and it results in the Motor Error.
5
Broken Power Supply for
Motor
Replace Switching
Power Supply
[3-8 BOARDS
REPLACEMENT]
When the Power Supply voltage for the Motor is not supplied, the
Motor cannot move and it results in the Motor Error.
6
Broken Servo Board
Servo Board
replacement
When the Motor Driver is broken, the Power Supply voltage for the
motor is not supplied and the motor cannot move. It results in the
Motor Error.
NO
0001
0004
0008
0005
0009
0010
0040
0080
0050
0090
6-8
Scan Motor Overcurrent Error 1
(Big load is put on the motor movement
instantaneously.)
Scan Motor Overcurrent Error 2
(A little load is put on the motor
movement for a long time.)
0010 and 0040 occurred at the same
time.
0010 and 0080 occurred at the same
time.
MEANING
CAUSE
Feed Motor Deviation Error
(The order from the CPU does not match
the feedback of the Feed Motor.)
< External factors >
1. Media Jamming
2. Pull or Move the Carriage by hands.
3. Carriage runs into a thing/hands.
4. Media is stuck because it is caught by the paper pipe.
5. Pull the media.
*The manual switch of take-up unit is used when the loading lever
is pulled.
*The media is sent to the opposite way by using control panel.
6. Too heavy media is loaded.
< Machine factors >
1. The grease lubrication of the motor gear is not enough.
2. Motor is broken./Life
3. Servo Board is broken.
4. Tool Carriage fixation to the belt is loose.
Feed Motor Overcurrent Error 1
(Big load is put on the motor movement
instantaneously.)
Feed Motor Overcurrent Error 2
(A little load is put on the motor
movement for a long time.)
0001 and 0004 occurred at the same
time.
0001 and 0008 occurred at the same
time.
Scan Motor Deviation Error
(The order from the CPU does not match
the feedback of the Feed Motor.)
ERROR DESCRIPTION
SCAN MOTOR ERROR
CODE : 0000 0000
Originally Detected Error
Finally Detected Error
