4-32
Print the test pattern again.
If the result is not satisfactory, repeat 11 to 15 .
16
15
1
2
3
- When the lines other than K are above the K lines, turn
the Adjustment Screw CW.
- When the lines other than K are below the K lines, turn
the Adjustment Screw CCW.
Adjust the Head positions refering to the left-
end K head as the base position. The position
of K head on the left end does not need to be
adjusted.
Tighten the screws fixing the Head in the order reverse of
loosening, using the TORQUE DRIVER (ST-056).
Torque for tightening is
2kgf • cm (20cNm)
.
Make sure not to tighten the screws firmly.
The shifting of lines should be less than 1/2 dot.
