4-21
Press MENU key, and set [IP ADDRESS], [SUBNET MASK]
and [GATEWAY ADDR.].
Press [ ] and [ ] keys for moving between digits, and
[ ] and [ ] keys for selecting value. After setting an
address, press ENTER key to go next address setting.
When [GATEWAY ADDR.] is set, it returns to the waiting
mode for receiving the firmware by pressing ENTER key.
4
5
3
The setting made here is only temporary for the
firmware installation and it is not saved.
Start the Peck4 on PC.
[Peck4] screen is displayed, and click [Select Port] button.
Select [Type 3] ProIII etc. from [Product].
Also, Select [Via Network] and input IP address of XC-540
specified ealier.
Click [OK] button.
