3-59
5
6
7
Remove the Encoder Scale by removing the Plate fixing
the Encoder Scale at its right end and the Spring on its
left end.
8
Remove the Spring Plate from the Encoder Scale and fix
it to the Encoder Scale where there is no black dot
written on it.
Put the Encoder Scale in between the Encoder Plate and
the Guide Rail.
Then, fix the right end with the Plate and hook up the
Spring on the left end.
Make sure that the Encoder Scale its in place.
Make sure not make scratches or put grease
on the Encoder Scale when fixing it.
Do not touch the surface of the Encoder Scale.
Do not loosen or tighten the screws fixing the
Encoder Plate.
Spring
Encoder Scale
Plate
Black Dot
Spring Plate
Spring
Encoder Scale
Plate
Move the Head Carriage in a whole width of the machine.
Make sure that the Encoder Scale doesn't make contact
with the Encoder Module and also Encoder Scale is
between the slit of the Encoder Module.
Carry out the [4-7 LINEAR ENCODER SETUP].
Screw