3-67
1
Conical Type is used on both Left & Right Pinch Rollers
and flat type is used for the Middle Pinch Rollers.
3-13 PINCH ROLLER REPLACEMENT
Red marking is done on the outer side of
Left & Right Pinch Rollers so that .
Left Pinch Roller Right Pinch Roller
Red marking
2
Remove the E ring on one side if the Pinch Roller and pull
out the Shaft.
Pinch Roller
Shaft
3
Put the new Pinch Roller with Washers and put the Shaft
into the Pinch Roller.
Fixing operation becomes easy when you put the
Washers to the Pinch Roller with grease.
Washer
Replace the Washers on a paper not to
lose them which are fixed at both sides of
the Pinch Roller.
E ring
E ring
4
Fix the E ring and make sure that the Pinch Roller
rotates smoothly.
