4-51
key : Moves cut position towards front
key : Moves cut position towards rear
key : Moves cut position towards right
key : Moves cut position towards left
ENTER key : Saves new setting
MENU key : Moves out SETTING menu
7
8
+
-
+
-
F:
S:
9
[ ]
CUTTING MENU
CROP-CUT ADJ.
CROP-CUT ADJ.
SETTING
F:+0.30 +0.30mm
S:-0.40 -0.40mm
[ ]
[ ]
[ ]
A mark is printed, and detected by the crop mark sensor,
and its contour is cut. Confirm the cut line position on the
print visually.
When it is difficult to see the cut line visually,
use a magnifier.
Adjustment is completed if the position error of cut line is
/-0.1mm. If not, select [SETTING] menu again for
further adjustment.
Broken line is indicating the cut line
[Fine Adjustment]
Before adjustment
After adjustment
Broken line is indicating the cut line
Perform Test Print again for confirmation. Adjustment is
completed if the position of cut line is satisfactory. If not,
make an adjustment again.
