4-54
key : Moves cut position towards front
key : Moves cut position towards rear
key : Moves cut position towards right
key : Moves cut position towards left
ENTER key : Saves new setting
MENU key : Moves out SETTING menu
8
+
-
+
-
F:
S:
9
7
[ ]
CUTTING MENU
PRINT-CUT ADJ.
PRINT-CUT ADJ.
SETTING
F:+0.30 +0.30mm
S:-0.40 -0.40mm
[ ]
[ ]
[ ]
Three marks are printed at the left-end , right-end and the
center of the media, and each mark is cut. Confirm the
cut line positions on the marks visually.
When it is difficult to see the cut line visually,
use a magnifier.
Broken line is indicating the cut line
Adjustment is completed if the position error of cut line is
within the range below. If not, select [SETTING] menu
again for further adjustment.
[Fine Adjustment]
Left
Broken line is indicating the cut line
Perform Test Print again for confirmation. Adjustment is
completed if the position of cut line is satisfactory. If not,
repeat adjustment.
Mark on the right: /-0.1mm
Mark on the left: /-0.3mm
(Make adjustment based on the mark on the right)
Right (Base)
Center
+/-0.1mm
+/-0.3mm
