4-61
ST-002
ST-013
8
9
Pull up the handle part of the Tool Holder with the
TENSION GAUGE(ST-002) and measure the pressure
when the pen tip leaves the Bed.
Adjust the parameter in the [200gf] menu with [ ]
and [ ] keys for the pressure to be 195 to 205gf
(1.9N to 2.0N).
Press [ENTER] key to save the settings.
[ENTER]
200gf
56 57
[ ] [ ]
TOOL HOLDER
TOOL HOLDER
Select the [30gf] menu under [FORCE ADJUST] menu.
Confirm that the force is 25 to 35gf (0.25N to 0.35N)
when the tip of the pen leaves the Bed by lifting the
handle part of the Tool Holder with the DIAL TENSION
METER(ST-013).
When the value of the force is not proper, make an
adjustment again.
