3-65
22
Fix the Tool Carriage Board, and connect the Crop Mark
Sensor, Pinch Roller Sensor and Solenoid Wirings.
21
Put the Encoder Scale in between the Encoder Plate and
the Guide Rail.
Then, fix the right end with the Plate and hook up the
Spring on the left end.
Make sure that the Encoder Scale is in place.
Move the Head Carriage in a whole width of the machine.
Make sure that the Encoder Scale doesn't make contact
with the Encoder Module and also Encoder Scale is
between the slit of the Encoder Module.
Solenoid
Crop Mark Sensor
Pinch Roller Sensor
Tool Carriage
Board
Do not loosen or tighten the screws fixing the
Encoder Plate.
Spring Encoder Scale
Encoder Plate Screw Plate
20
Fix the Flexible Cable with the Clamp.
Clamp
19
