4-58
6
7
5
8
Move the Tool Carriage to the position under the H mark
which is written on the rail.
Turn the Adjustment Screw to adjust the space between the
Pen end and Bed to be 2.5mm to 2.6mm.
Move on to the Tool Pressure Adjustment.
ADJUSTMENT SCREW
TOOL CARRIAGE
TOP COVER
RAIL
BELT
The rail has an H mark at the point where Tool
H e i g h t A d j u s t m e n t i s m a d e d u r i n g t h e
production of the machine.
H mark indicates the highest position of the bed.
(The position where the space between the
Head and Bed is the smallest.)
Move the Pinch Rollers at the positions shown in the figure,
and lower them.
BED
PINCH ROLLER
GRIT ROLLER
