3-55
11
9
10
Replace to the new Carriage Belt.
Put adequate quantity of grease (P/# : 39008297•FLOIL
G902 14KG) between pulleys.
Tighten the Screws shown in the figure to fix both edges
of the Carriage Belt to the Belt Holder.
When fixing the Carriage Belt, make sure the
end of the Belt are not overlapped.
Plastic Plate
Plastic Plate
Belt Holder
Screw
Metal Plate
NG)
OK)
< Cross-section diagram >
Check that the Belt is not twisted.
Perform the followings to adjust the Pulley
Tighten the Screw shown in the figure until the Stay
reaches to the Shaft.
Shaft
Stay
Screw
< Right side >
OK)
Carriage Belt
Plastic Plate
Plastic Plate
Belt Holder
Screw
Metal Plate
Carriage Belt
Plastic Plate
Plastic Plate
Belt Holder
Screw
Metal Plate
Carriage Belt
Screw
Metal Plate
Plastic Plate
Belt Holder
Carriage Belt
Be careful with fixing direction of the Plastic
Plate and fixing order of the Plates.
1.
< Cross-section diagram >
Revised 1
