4-50
F: Feed direction S: Scan direction
Left: Current value Right: New value
(Setting range: +/-2.00mm In 0.01mm unit)
key : Value of F, t
key : Value of F, towards -
key : Value of S, t
key : Value of S, towards -
ENTER key : Saves new setting
MENU key : Moves out SETTING menu
+2.0
-2.0
+1.0
-1.0
+0.5
-0.5
+0.0
-0.0
+1.5
-1.5
Scan
+2.0
-2.0
+1.0
-1.0
+0.5
-0.5
+0.0
-0.0
+1.5
-1.5
Feed
-0.5
5
6
[ ]
CUTTING MENU
CROP-CUT ADJ.
CROP-CUT ADJ.
SETTING
F:+0.30 +0.30mm
S:-0.40 -0.40mm
[ ]
[ ]
[ ]
[ ]
CUTTING MENU
CROP-CUT ADJ.
CROP-CUT ADJ.
TEST PRINT
[ ]
4
From the Test Pattern, find the value where the print line
matches the cut line.
In this case, the correction value for the scan direction is
"-0.3".
<TEST PATTERN>
Correction-value scale
Cut line
Select [SETTING] from the [CROP-CUT ADJ.] menu and
enter the correction-values found in the Test Pattern for
both Feed and Scan.
When it is difficult to see the cut line visually,
use a magnifier.
Select [TEST PRINT] under the [CROP-CUT ADJ.]
menu.
Press [ENTER] key to start the test print.
