4-38
Turn on the SUB POWER SW while pressing [ ], [ ]
and [ ] keys for LIMIT INITIALIZE mode.
2
1
3
LIMIT INITIALIZE
MENU
[ ], [ ], [ ] + SUB POWER ON
MOVE TO CAP POS
4-6 LIMIT POSITION & CUT DOWN POSITION INITIALIZE (Referential Time : 10min.)
RIGHT I/S COVER
FRONT COVER
RIGHT INNER PLATE
Remove the RIGHT I/S COVER, FRONT COVER and
RIGHT INNER PLATE.
This is for adjusting the relative distance between the Limit Sensor and the Capping Position, and also
detecting the distance from the Cut Down Position to the Limit Sensor after completing the adjustment.
When the Limit Position is not correctly set, it may cause some problems such as a head capping error, and
also cause a cutter-down error when separating the sheet.
PUMP COVER
Remove the PUMP COVER, removing the 5 screws
shown in the figure.
RIGHT INNER PLATE has a small hook on its
right bottom and it is inserted to the lower
cover. Be cautious when removing it.
