Roland JUNO-Di Editor, Owner'S Manual

Page: 82 / 92

82
Effects List
This is a reverse delay that adds a reversed and delayed sound to the
input sound. A tap delay is connected immediately after the reverse
delay.
fig.MFX-50
Adds a shuffle to the delay sound, giving the sound a bouncy delay
effect with a swing feel.
fig.MFX-51
50: REVERSE DELAY
Parameter Value Explanation
Threshold 0–127
Volume at which the reverse
delay will begin to be applied
Rev Delay Time
0–1300 msec, note
Delay time from when sound is
input into the reverse delay until
the delay sound is heard
Rev Delay
Feedback #
-98–+98%
Proportion of the delay sound
that is to be returned to the input
of the reverse delay (negative
values invert the phase)
Rev Delay HF
Damp 200–8000 Hz,
BYPASS
Frequency at which the
high-frequency content of the
reverse-delayed sound will be cut
(BYPASS: no cut)
Rev Delay Pan L64–63R
Panning of the reverse delay
sound
Rev Delay Level
0–127
Volume of the reverse delay
sound
Delay 1 – 3 Time 0–1300 msec, note
Delay time from when sound is
input into the tap delay until the
delay sound is heard
Delay 3 Feedback # -98–+98%
Proportion of the delay sound
that is to be returned to the input
of the tap delay (negative values
invert the phase)
Delay HF Damp 200–8000 Hz, BYPASS
Frequency at which the low-
frequency content of the tap
delay sound will be cut (BYPASS:
no cut)
Delay 1 Pan,
Delay 2 Pan
L64–63R Panning of the tap delay sounds
Delay 1 Level,
Delay 2 Level
0–127 Volume of the tap delay sounds
Low Gain -15–+15 dB
Amount of boost/cut for the
low-frequency range
High Gain -15–+15 dB
Amount of boost/cut for the
high-frequency range
Balance #
D100:0W–D0:100W
Volume balance of the original
sound (D) and delay sound (W)
Level 0–127 Output volume
Feedback
L in
R in
Rev. Delay
L out
R out
2-Band
EQ
2-Band
EQ
Rev
Delay
D2
D1
D3
51: SHUFFLE DELAY
Parameter Value Explanation
Delay Time #
0–2600 msec,
note Adjusts the time until the delay sound is
heard.
Shuffle
Rate #
0–100
Adjusts the ratio (as a percentage) of the
time that elapses before Delay B sounds
relative to the time that elapses before the
Delay A sounds.
When set to 100, the delay times are the
same.
Acceleration 0–15
Adjusts the speed which the Delay Time
changes from the current setting to its
specified new setting.
Feedback # -98–+98%
Adjusts the amount of the delay that’s
feedback into the effect. Negative (-) settings
invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don’t want to filter out any high frequencies,
set this parameter to BYPASS.
Pan A/B 0–127 Stereo location of Delay A/B
Level A/B 0–127 Volume of delay A/B
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
Feedback
L in
R in
Delay
L out
R out
2-Band
EQ
2-Band
EQ
A
B
Delay A
Delay B