17
EFFECTS Parameters
In Patch mode you can use one multi-effect (MFX), one chorus, and one reverb.
Here you can make overall settings for effects, such as the output destination and level of the various signals.
PATCH EFFECTS
Signal Flow and Parameters (ROUTING)
Parameter
Range
Explanation
TONE SELECT
(KEY NAME)
1–4
(A0–C8)
The tone (rhythm tone) to edit
If you’ve selected a rhythm set, this will be KEY NAME.
PATCH OUTPUT
ASSIGN
(RHYTHM OUTPUT
ASSIGN)
MFX,
L+R,
L,
R,
TONE
Specifies how the unprocessed sound of the patch (rhythm set) will be output
If you’ve selected a rhythm set, this will be RHYTHM OUTPUT ASSIGN.
MFX:
Output in stereo via the multi-effect. Chorus and reverb can also be applied after the multi-
effect.
L+R:
Output in stereo from the OUTPUT jacks without passing through the multi-effect
L:
Output in mono from the OUTPUT L jack without passing through the multi-effect
R:
Output in mono from the OUTPUT R jack without passing through the multi-effect
TONE:
Output according to the settings of each tone
TONE OUTPUT
ASSIGN
MFX,
L+R,
L,
R
Specifies how the unprocessed sound of each tone will be output
MFX:
Output in stereo via the multi-effect. Chorus and reverb can also be applied after the multi-
effect.
L+R:
Output in stereo from the OUTPUT jacks without passing through the multi-effect
L:
Output in mono from the OUTPUT L jack without passing through the multi-effect
R:
Output in mono from the OUTPUT R jack without passing through the multi-effect
* The setting you specify here is valid only if PATCH OUTPUT ASSIGN is set to “TONE.”
* If STRUCTURE (p. 30) is set to TYPE 02–10, the settings for tone 1 (3) will follow the settings of
tone 2 (4). (This is because the outputs of tones 1 and 2 are combined into tone 2, and the outputs
of tones 3 and 4 are combined into tone 4.)
TONE OUTPUT
LEVEL
0–127
Level of signal sent from each tone to the destination specified by OUTPUT ASSIGN
TONE CHORUS
SEND LEVEL
0–127
Level of signal sent from each tone to the chorus
TONE REVERB
SEND LEVEL
0–127
Level of signal sent from each tone to the reverb
MFX (Type)
0–79
Type of multi-effect to use (choose one of 79 types)
For details on each multi-effect, refer to “Multi-Effects Parameters (MFX1–3, MFX)” (p. 64).
MFX OUTPUT LEVEL
0–127
Volume of the sound that has been processed by the multi-effect
MFX CHORUS SEND
LEVEL
0–127
Amount of chorus applied to the sound that has been processed by the multi-effect
MFX REVERB SEND
LEVEL
0–127
Amount of reverb applied to the sound that has been processed by the multi-effect
CHORUS (Type)
OFF,
CHORUS, DELAY,
GM2 CHORUS
Type of chorus
OFF:
Chorus/delay will not be used
CHORUS:
Chorus
DELAY:
Delay
GM2 CHORUS:
GM2 chorus
CHORUS LEVEL
0–127
Volume of the sound that has been processed by the chorus
CHORUS OUTPUT
SELECT
MAIN,
MAIN+REV, REV
Output destination of the sound that has been processed by the chorus
MAIN:
Output in stereo to the OUTPUT jacks
MAIN+REV:
Output in stereo to the OUTPUT jacks and in mono to the reverb
REV
: Output in mono to reverb
