41
Detailed Editing for a Patch (PATCH Parameters)
STEP LFO
You can use the force with which keys are played to control the way each Tone is played.
fig.TMT-V.e
When using the Matrix Control to have different tones played, set the lowest value (LOWER) and highest value (UPPER) of the value of the MIDI
message used.
Instead of using Velocity, you can also have tones substituted using the Matrix Control. However, the keyboard velocity and the Matrix Control
cannot be used simultaneously to make different tones to sound. When using the Matrix Control to switch tones, set the VELOCITY CONTROL
parameter to “OFF.”
Parameter
Value
Explanation
STEP TYPE
TYPE1,
TYPE2
When generating an LFO waveform from the data specified in LFO Step 1–16, specify whether the level
will change abruptly at each step or will be connected linearly.
TYPE1:
stair-step change
TYPE2:
linear change
STEP 1–16
-36–+36
Specifies the data for the Step LFO.
If the LFO PITHC DEPTH is +63, each +1 unit of the step data corresponds to a pitch of +50 cents.
VELOCITY RANGE
Parameter
Value
Explanation
VELOCITY CONTROL
OFF, ON,
RANDOM,
CYCLE
Determines whether a different tone is played (ON) or not (OFF) depending on the force with
which the key is played (velocity).
RANDOM:
The patch’s constituent tones will sound randomly, regardless of any Velocity
messages.
CYCLE:
The patch’s constituent tones will sound consecutively, regardless of any Velocity
messages.
TMT CONTROL SW
OFF, ON
Use the Matrix Control (p. 42) to enable (ON), or disable (OFF) sounding of different tones.
FADE LOWER
0–127
Determines what will happen to the tone’s level when the tone is played at a velocity lower
than Velocity Range Lower.
If you don’t want the tone to sound at all, set this parameter to “0.”
LOWER
1–(UPPER)
Specifies the lowest velocity at which the tone will sound.
UPPER
(LOWER)–127
Specifies the highest velocity at which the tone will sound.
FADE UPPER
0–127
Determines what will happen to the tone’s level when the tone is played at a velocity greater
than Velocity Range Upper.
If you don’t want the tone to sound at all, set this parameter to “0.”
Velo Range Lower
Velo Range Upper
Velo Fade Lower
Velo Fade Upper
Level
The tone sounded
when you play softly
The tone sounded
when you play strongly
Velocity
