27
Detailed Editing for a Patch (PATCH Parameters)
TVA
Parameter
Value
Explanation
CUTOFF
★
(Cutoff Frequency)
0–127
Frequency at which the filter begins to have an effect on the waveform’s frequency components
RES
★
(Resonance)
0–127
Emphasizes the portion of the sound in the region of the cutoff frequency, adding character to the
sound
* Excessively high settings can produce oscillation, causing the sound to distort.
FILTER ENV DEPTH
(Filter Envelope Depth)
-63–+63
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings will
invert the shape of the envelope.
FILTER ENV A
(Filter Envelope Attack)
0–127
TVF envelope times
Higher settings will lengthen the time until the next cutoff frequency level is reached.
This will modify ENV T1 (p. 36).
FILTER ENV D
(Filter Envelope Decay)
0–127
TVF envelope times
This will modify ENV T3 (p. 36).
FILTER ENV S
(Filter Envelope Sustain)
0–127
TVF envelope levels
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
This will modify ENV L3 (p. 36).
FILTER ENV R
(Filter Envelope Release)
0–127
TVF envelope times
This will modify ENV T4 (p. 36).
Parameter
Value
Explanation
LEVEL
★
0–127
Volume of the tone
This setting is useful primarily for adjusting the volume balance between tones.
PAN
★
L64–0–63R
Left/right position of the tone
AMP ENV A
(Amp Envelope Attack)
0–127
TVA envelope times
Higher settings will lengthen the time until the next volume level is reached.
This will modify ENV T1 (p. 38).
AMP ENV D
(Amp Envelope Decay)
0–127
TVA envelope times
This will modify ENV T3 (p. 38).
AMP ENV S
(Amp Envelope Sustain)
0–127
TVA envelope levels
Specify how the volume will change at each point, relative to the LEVEL value.
This will modify ENV L3 (p. 38).
AMP ENV R
(Amp Envelope Release)
0–127
TVA envelope times
This will modify ENV T4 (p. 38).
SEND LEVEL OUT
(Output Level)
0–127
Level of the signal that is sent to the output destination specified by OUTPUT ASSIGN (p. 38)
SEND LEVEL (OUTPUT ASSIGN = MFX)
CHO (Chorus Send)
0–127
Level of the signal sent to chorus for each tone if the tone is sent through MFX
REV (Reverb Send)
0–127
Level of the signal sent to reverb for each tone if the tone is sent through MFX
SEND LEVEL (OUTPUT ASSIGN = non MFX)
CHO (Chorus Send)
0–127
Level of the signal sent to chorus for each tone if the tone is not sent through MFX
REV (Reverb Send)
0–127
Level of the signal sent to reverb for each tone if the tone is not sent through MFX
