36
Detailed Editing for a Patch (PATCH Parameters)
FILTER ENV (TVF ENVELOPE)
Parameter marked with a “
★
” can be controlled using specified MIDI messages.
(Matrix Control,
Parameter
Value
Explanation
VEL CURVE
(Cutoff Velocity Curve)
FIX, 1–7
Curve that determines how keyboard playing dynamics (velocity) will affect the cutoff
frequency
Set this to “FIX” if you don’t want the Cutoff frequency to be affected by the keyboard
velocity.
VEL SENS
(Cutoff Velocity Sens)
-63–+63
Use this parameter when changing the cutoff frequency to be applied as a result of changes in
playing velocity.
If you want strongly played notes to raise the cutoff frequency, set this parameter to positive
(+) settings.
Parameter
Value
Explanation
DEPTH
-63–+63
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings will invert
the shape of the envelope.
TIME KF
(Time Keyfollow)
-100–+100
Use this setting if you want the TVF envelope times (T2–T4) to be affected by the keyboard location.
Based on the TVF envelope times for the C4 key (center C), positive (+) settings will cause notes higher
than C4 to have increasingly shorter times.
VEL CURVE
(Velocity Curve)
FIX, 1–7
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to “FIX” if you don’t want the TVF Envelope to be affected by the keyboard velocity.
VEL SENS
(Velocity Sens)
-63–+63
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played notes, and
negative (-) settings will cause the effect to be less.
T1 SENS
-63–+63
This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
T4 SENS
-63–+63
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
T1–4
★
(Time 1–4)
0–127
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
L0–4
(Level 0–4)
0–127
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
1
2
3
4
5
6
7
1
2
3
4
5
6
7
T1
T2
T3
T4
L3
L1
L0
L2
L4
Note off
Cutoff
Frequency
TVF Envelope
Time
Note on
C4
C3
C2
C1
C5
C6
C7
0
+50
+100
-50
-100
Key
Time
Time Keyfollow
