74
Effects List
This is a chorus effect with added Tremolo (cyclic modulation of
volume).
fig.MFX-27
This is a multiple chorus that applies two-phase modulation in stereo. It
gives no impression of modulation, but produces a transparent chorus
effect.
fig.MFX-28
This applies a 3D effect to the chorus sound. The chorus sound will be
positioned 90 degrees left and 90 degrees right.
fig.MFX-29
27:
TREMOLO CHORUS
Parameter
Value
Explanation
Pre Delay
0.0–100 msec
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Chorus Rate #
0.05–10.00 Hz, note
Modulation frequency of the
chorus effect
Chorus Depth
0–127
Modulation depth of the chorus
effect
Tremolo Rate #
0.05–10.00 Hz, note
Modulation frequency of the
tremolo effect
Tremolo
Separation
0–127
Spread of the tremolo effect
Tremolo Phase
0–180 deg
Spread of the tremolo effect
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the tremolo
chorus sound (W)
Level
0–127
Output Level
28:
SPACE-D
Parameter
Value
Explanation
Pre Delay
0.0–100 msec
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Rate #
0.05–10.00 Hz, note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180 deg
Spatial spread of the sound
Low Gain
-15–+15 dB
Gain of the low range
High Gain
-15–+15 dB
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
Level
0–127
Output Level
Tremolo Chorus
L in
R in
L out
R out
Balance D
Balance D
Balance W
Balance W
L in
R in
Space D
Space D
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
29:
3D CHORUS
Parameter
Value
Explanation
Filter Type
OFF, LPF, HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range
above the Cutoff Freq
HPF:
cuts the frequency range
below the Cutoff Freq
Cutoff Freq
200–8000 Hz
Center frequency when using the
filter to cut a specific frequency
range
Pre Delay
0.0–100 msec
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Rate #
0.05–10.00 Hz, note
Frequency of modulation
Depth
0–127
Modulation depth of the chorus
effect
Phase
0–180 deg
Spatial spread of the sound
Output Mode
SPEAKER, PHONES
Adjusts the method that will be
used to hear the sound that is
output to the OUTPUT jacks. The
optimal 3D effect will be achieved
if you select
SPEAKER
when using
speakers, or
PHONES
when using
headphones.
Low Gain
-15–+15 dB
Gain of the low range
High Gain
-15–+15 dB
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
Level
0–127
Output Level
L
R
3D Chorus
2-Band
EQ
2-Band
EQ
R out
L out
