background image

47

Detailed Editing for a Rhythm Set (RHYTHM Parameters)

WMT

PITCH

Parameter

Value

Explanation

WAVE NUMBER L/R

Off, 1–

Waves comprising the rhythm tone

When in monaural mode, only the left side (L) is specified. When in stereo, the right side (R) is 
also specified.
To select a left/right pair of waveforms, first select the left (L) wave number, then double-click 
the wave number of the right (R) wave to select it.

GAIN

-6, 0, 
+6, +12

Gain (amplification) of the waveform

The value changes in 6 dB (decibel) steps—an increase of 6 dB doubles the waveform’s gain.

TEMPO SYNC

OFF, ON

When you wish to synchronize a Phrase Loop to the clock (tempo), set this to “ON.”

LEVEL

0–127

Volume of the waveform

PAN

L64–0–63R

Left/right position of the waveform

TUNE COARSE

-48–+48

Pitch of the waveform’s sound (in semitones, +/-4 octaves)

TUNE FINE

-50–+50

Pitch of the waveform’s sound (in 1-cent steps; one cent is 1/100th of a semitone)

Parameter

Value

Explanation

TUNE COARSE

C-1–G9

Pitch at which a rhythm tone sounds

Set the coarse tuning for Waves comprising the rhythm tones with the WAVE COARSE TUNE 
parameter (p. 51).

TUNE FINE

-50–+50

Pitch of the rhythm tone’s sound (in 1-cent steps; one cent is 1/100th of a semitone)

Set the fine tuning for Waves comprising the rhythm tones with the WAVE FINE TUNE 
parameter (p. 51).

PITCH ENV DEPTH
(Pitch Envelope Depth)

-12–+12

Depth of the Pitch Envelope

Higher settings will cause the pitch envelope to produce greater change. Negative (-) settings 
will invert the shape of the envelope.

PITCH ENV A
(Pitch Envelope Attack)

0–127

Pitch envelope times

Higher settings will result in a longer time until the next pitch is reached.
This will modify ENV T1 (p. 52).

PITCH ENV D
(Pitch Envelope Decay)

0–127

Pitch envelope times

This will modify ENV T3 (p. 52).

PITCH ENV S
(Pitch Envelope Sustain)

-63–+63

Pitch envelope levels

Specify how the pitch will change at each point, relative to the pitch set with COARSE TUNE 
or FINE TUNE.
This will modify ENV L3 (p. 52).

PITCH ENV R
(Pitch Envelope Release)

0–127

Pitch envelope times

This will modify ENV T4 (p. 52).

Summary of Contents for JUNO-Di Editor





























































































Reviews: