85
Effects List
This is an effect that intentionally degrades the sound quality for
creative purposes.
fig.MFX-57
In addition to a Lo-Fi effect, this effect also generates radio noise.
fig.MFX-58
This effect produces a muffled sound, like that heard through a telephone.
fig.MFX-59
Simulates a sound recorded on an analog record and played back on a
record player. This effect also simulates the various types of noise that are
typical of a record, and even the rotational irregularities of an old turntable.
fig.MFX-60
57:
LOFI COMPRESS
Parameter
Value
Explanation
Pre Filter Type
1–6
Selects the type of filter applied to the sound
before it passes through the Lo-Fi effect.
1:
Compressor off
2–6:
Compressor on
LoFi Type
1–9
Degrades the sound quality. The sound
quality grows poorer as this value is
increased.
Post Filter Type
OFF, LPF, HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff
HPF:
cuts the frequency range below the
Cutoff
Post Filter
Cutoff
200–8000 Hz
Basic frequency of the Post Filter
Low Gain
-15–+15 dB
Gain of the low range
High Gain
-15–+15 dB
Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level #
0–127
Output level
58:
LOFI RADIO
Parameter
Value
Explanation
LoFi Type
1–9
Degrades the sound quality. The sound
quality grows poorer as this value is
increased.
Post Filter Type
OFF, LPF,
HPF
Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff
HPF:
cuts the frequency range below the
Cutoff
Post Filter
Cutoff
200–8000 Hz
Basic frequency of the Post Filter
Radio
Detune #
0–127
Simulates the tuning noise of a radio. As this
value is raised, the tuning drifts further.
Radio Noise
Level #
0–127
Volume of the radio noise
Low Gain
-15–+15 dB
Gain of the low range
High Gain
-15–+15 dB
Gain of the high range
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level
0–127
Output level
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
2-Band
EQ
2-Band
EQ
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Radio
2-Band
EQ
2-Band
EQ
59:
TELEPHONE
Parameter
Value
Explanation
Voice
Quality #
0–15
Audio quality of the telephone voice
Treble
-15–+15 dB
Bandwidth of the telephone voice
Balance #
D100:0–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level
0–127
Output level
60:
PHONOGRAPH
Parameter
Value
Explanation
Signal
Distortion
0–127
Depth of distortion
Frequency
Range
0–127
Frequency response of the playback system
Decreasing this value will produce the
impression of an old system with a poor
frequency response.
Disc Type
LP, EP, SP
Rotational speed of the turntable
This will affect the frequency of the
scratch noise.
Scratch Noise
Level
0–127
Amount of noise due to scratches on the
record
Dust Noise
Level
0–127
Volume of noise due to dust on the record
Hiss Noise
Level
0–127
Volume of continuous “hiss”
Total Noise
Level #
0–127
Volume of overall noise
Wow
0–127
Depth of long-cycle rotational irregularity
Flutter
0–127
Depth of short-cycle rotational irregularity
Random
0–127
Depth of indefinite-cycle rotational
irregularity
Total Wow/
Flutter #
0–127
Depth of overall rotational irregularity
Balance #
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level
0–127
Output level
L in
R in
L out
R out
Telephone
Telephone
L in
R in
Phonograph
Phonograph
L out
R out
Balance W
Balance W
Balance D
Balance D
