37
Detailed Editing for a Patch (PATCH Parameters)
TVA adjusts the volume.
Parameter marked with a “
★
” can be controlled using specified MIDI messages.
* When a TYPE 02–10 has been selected for STRUCTURE (p. 30), the
settings for PAN KF, RANDOM PAN DEPTH, and ALT. PAN DEPTH for tone
1 (3) will be in concord with the settings for tone 2 (4). (This is because the
outputs of tones 1 and 2 are consolidated in tone 2, and the outputs of
tones 3 and 4 are consolidated in tone 4.)
TVA
Parameter
Value
Explanation
LEVEL
★
0–127
Volume of the tone
This setting is useful primarily for adjusting the volume balance between tones.
VEL CURVE
(Velocity Curve)
FIX, 1–7
Curve that determines how keyboard playing dynamics (velocity) will affect the volume
Set this to “FIX” if you don’t want the volume of the tone to be affected by the keyboard velocity.
VEL SENS
(Velocity Sens)
-63–+63
Set this when you want the volume of the tone to change depending on keyboard playing dynamics
Set this to a positive (+) value to have the changes in tone volume increase the more forcefully the keys are
played; to make the tone play more softly as you play harder, set this to a negative (-) value.
BIAS
Bias causes the volume to be affected by the keyboard position. This is useful for changing volume through keyboard position (pitch) when playing
acoustic instruments.
BIAS LEVEL
-100–+100
Angle of the volume change that will occur in the selected Bias Direction
Larger settings will produce greater change. Negative (-) values will invert the change direction.
BIAS POSITION
C-1 –G9
Key relative to which the volume will be modified
BIAS DIRECTION
LOWER,
UPPER,
LO&UP,
ALL
Direction in which change will occur starting from the Bias Position
LOWER:
The volume will be modified for the keyboard area below the Bias Position.
UPPER:
The volume will be modified for the keyboard area above the Bias Position.
LO&UP:
The volume will be modified symmetrically toward the left and right of the Bias Position.
ALL:
The volume changes linearly with the Bias Position at the center.
Parameter
Value
Explanation
PAN
★
L64–0–63R
Left/right position of the tone
PAN KF
(Pan Keyfollow)
-100–+100
Use this parameter if you want key position to affect panning.
Positive (+) settings will cause notes higher than C4 key (center C) to be panned increasingly further
toward the right, and negative (-) settings will cause notes higher than C4 key (center C) to be panned
toward the left. Larger settings will produce greater change.
RANDOM PAN
DEPTH
0–63
Use this parameter when you want the stereo location to change randomly each time you press a key.
Higher settings will produce a greater amount of change.
ALT. PAN DEPTH
(Alternate Pan Depth)
L63–0–63R
This setting causes panning to be alternated between left and right each time a key is pressed.
Higher settings will produce a greater amount of change. “L” or “R” settings will reverse the order in
which the pan will alternate between left and right. For example if two tones are set to “L” and “R”
respectively, the panning of the two tones will alternate each time they are played.
1
2
3
4
5
6
7
C-1
G9
+
0
–
C-1
G9
+
0
–
C-1
G9
+
0
–
C-1
G9
+
0
–
+
0
–
+
0
–
LOWER
LO&UP
UPPER
ALL
Bias Position
Level
Level
Level
Level
Key
Key
Key
Key
Bias Position
Bias Position
Bias Position
C4
C3
C2
C1
C5
C6
C7
0
+50
+100
-50
-100
o
L
R
Pan
Pan Keyfollow
Key
