22
EFFECTS Parameters
A performance contains parameters that specify whether specific MIDI messages will be received for each MIDI channel (p. 62). If you want to
use multi-effect control, make sure that reception is enabled for the corresponding MIDI message. If MIDI messages cannot be received, multi-
effect control will not work.
Chorus Settings (CHORUS)
Parameter
Range
Explanation
ON/OFF
OFF, ON
Turns the chorus on/off
* The chorus on/off setting cannot be saved.
TYPE
OFF,
CHORUS,
DELAY,
GM2
CHORUS
Type of chorus
OFF:
Chorus/delay will not be used
CHORUS:
Chorus
DELAY:
Delay
GM2 CHORUS:
GM2 chorus
LEVEL
0–127
Volume of the sound that has been processed by the chorus
OUTPUT SELECT
MAIN,
MAIN+REV,
REV
Output destination of the sound that has been processed by the chorus
MAIN:
Output in stereo to the OUTPUT jacks
MAIN+REV:
Output in stereo to the OUTPUT jacks and in mono to the reverb
REV
: Output in mono to reverb
Parameters for each
chorus type
Set the parameters of the selected chorus type.
Refer to “Chorus Parameters” (p. 91).
Reverb Settings (REVERB)
Parameter
Range
Explanation
ON/OFF
OFF, ON
Turns the reverb on/off
* The reverb on/off setting cannot be saved.
TYPE
OFF,
REVERB,
SRV ROOM,
SRV HALL,
SRV PLATE,
GM2 REVERB
Type of reverb
OFF:
Reverb will not be used
REVERB:
Basic reverb
SRV ROOM:
Reverb that simulates the reverberation of a room in greater detail
SRV HALL:
Reverb that simulates the reverberation of a hall in greater detail
SRV PLATE:
Simulation of a plate echo (a reverb device that uses a metal plate)
GM2 REVERB:
GM2 reverb
LEVEL
0–127
Volume of the sound that has been processed by the reverb
Parameters for each
reverb type
Set the parameters of the selected reverb type.
Refer to “Reverb Parameters” (p. 92).
