62
Detailed Editing for a Performance (PERFORM Parameters)
Parts 1–16 of a performance correspond to MIDI channels 1–16 of MIDI messages received from an external MIDI device.
For each channel you can specify whether MIDI message reception will be enabled (on) or disabled (off). You can also enable reception for only
specific types of messages.
MIDI (PERFORM MIDI SETTING)
Parameter
Value
Explanation
RCV CHANNEL
(Receive Channel)
1–16
MIDI receive channel for each part
RCV MIDI
(Receive MIDI)
OFF, ON
Enables/disables MIDI message reception for each part.
If this is OFF, that part cannot be played. Normally, you can leave this ON, but you
can turn it OFF if you don’t want a specific part to play.
RCV PC
(Receive Program Change)
OFF, ON
Enables/disables reception of the specific MIDI message for each MIDI channel.
RCV BS
(Receive Bank Select)
RCV PB
(Receive Pitch Bend)
RCV CH PRESS
(Receive Channel Pressure)
RCV POLY PRESS
(Receive Polyphonic Key
Pressure)
RCV MOD
(Receive Modulation)
RCV VOLUME
(Receive Volume)
RCV PAN
(Receive Pan)
RCV EXP
(Receive Expression)
RCV HOLD-1
(Receive Hold-1)
PHASE LOCK
OFF, ON
Set to “ON” when you want to suppress discrepancies in timing of parts played on the
same MIDI channel.
* When this parameter is set to “ON,” parts on the same MIDI channel are put in a
condition in which their timing is matched, enabling them to be played at the same
time. Accordingly, a certain amount of time may elapse between reception of the
Note messages and playing of the sounds. Turn this setting to “ON” only as needed.
VELOCITY CURVE TYPE
OFF, 1–4
Velocity curve for each MIDI channel
Selects for each MIDI channel one of the four following Velocity Curve types that best
matches the touch of the connected MIDI keyboard.
Set this to “OFF” if you are using the MIDI keyboard’s own velocity curve.
2
1
3
4
