manualshive.com logo in svg

Rohde & Schwarz ZNL Series, User Manual

Share
Download
Rohde & Schwarz ZNL Series User Manual Download Page 75

Analysis

R&S

®

ZNL

75

User Manual 1178.5989.02 ─ 06

Remote command: 

CALCulate<n>:MARKer<ms>:LINK:TO:MARKer<md>

 

on page 174

CALCulate<n>:DELTamarker<ms>:LINK:TO:MARKer<md>

 

on page 171

CALCulate<n>:DELTamarker<m>:LINK

 

on page 170

Assigning the Marker to a Trace

The "Trace" setting assigns the selected marker to an active trace. The trace deter-
mines which value the marker shows at the marker position. If the marker was previ-
ously assigned to a different trace, the marker remains on the previous frequency or
time, but indicates the value of the new trace.

If a trace is turned off, the assigned markers and marker functions are also deactiva-
ted.

Remote command: 

CALCulate<n>:MARKer<m>:TRACe

 

on page 175

Select Marker

The "Select Marker" function opens a dialog box to select and activate or deactivate
one or more markers quickly.

Remote command: 

CALCulate<n>:MARKer<m>[:STATe]

 

on page 174

CALCulate<n>:DELTamarker<m>[:STATe]

 

on page 172

All Marker Off

Deactivates all markers in one step.

Remote command: 

CALCulate<n>:MARKer<m>:AOFF

 

on page 173

Marker Usage

Summary of Contents for ZNL Series

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands