![Rohde & Schwarz ZNL Series User Manual Download Page 169](http://html.mh-extra.com/html/rohde-and-schwarz/znl-series/znl-series_user-manual_1477893169.webp)
Remote Commands to Perform Measurements with I/Q Data
R&S
®
ZNL
169
User Manual 1178.5989.02 ─ 06
DISPlay[:WINDow<n>]:SGRam:COLor:UPPer
<Percentage>
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer
<Percentage>
This command defines the end point of the color map.
Suffix:
<n>
.
Parameters:
<Percentage>
Statistical frequency percentage.
Range:
0 to 66
*RST:
0
Default unit: %
Example:
DISP:WIND:SGR:COL:UPP 95
Sets the start of the color map to 95%.
Manual operation:
See
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]
<ColorScheme>
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]
<ColorScheme>
This command selects the color scheme.
Parameters:
<ColorScheme>
HOT
Uses a color range from blue to red. Blue colors indicate low lev-
els, red colors indicate high ones.
COLD
Uses a color range from red to blue. Red colors indicate low lev-
els, blue colors indicate high ones.
RADar
Uses a color range from black over green to light turquoise with
shades of green in between.
GRAYscale
Shows the results in shades of gray.
*RST:
HOT
Example:
DISP:WIND:SPEC:COL GRAY
Changes the color scheme of the spectrogram to black and
white.
Manual operation:
See
" Hot / Cold / Radar / Grayscale "
9.7.3
Using Markers
The following commands are available for marker settings and functions in the I/Q Ana-
lyzer application.
I/Q Analysis