Rohde & Schwarz ZNL Series User Manual Download Page 71

Page: 71 / 240

Analysis

R&S

ZNL

User Manual 1178.5989.02 ─ 06

Remote command:

FORMat:DEXPort:DSEParator

on page 211

Export Trace to ASCII File

Saves the selected trace or all traces in the currently active result display to the speci-
fied file and directory in the selected ASCII format.

Remote command:

MMEMory:STORe<n>:TRACe

on page 212

File Type ← Export Trace to ASCII File

Determines the format of the ASCII file to be imported or exported.

Depending on the external program in which the data file was created or is evaluated,
a comma-separated list (

CSV

) or a plain data format (

DAT

) file is required.

Remote command:

FORMat:DEXPort:FORMat

on page 211

Decimal Separator ← Export Trace to ASCII File

Defines the decimal separator for floating-point numerals for the data export/import
files. Evaluation programs require different separators in different languages.

Trace / Data Export Configuration

Summary of Contents for ZNL Series

















































































































































































































































Search results

Summary of Contents for ZNL Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz ZNL Series, User Manual

Search results

Summary of Contents for ZNL Series

Reviews:

Brands by name

Popular brands