Rohde & Schwarz ZNL Series, User Manual

Page: 29 / 240

Configuration
R&S
®
ZNL
29 User Manual 1178.5989.02 ─ 06
See Chapter 5.7, "Data Acquisition and Bandwidth Settings" , on page 51
6. Analysis settings and functions
See Chapter 6, "Analysis" , on page 60
7. Display configuration
See Chapter 5.8, "Display Configuration" , on page 57
To configure settings
► Select any button in the "Overview" to open the corresponding dialog box.
Select a setting in the channel bar (at the top of the channel setup tab) to change a
specific setting.
For step-by-step instructions on configuring I/Q Analyzer measurements, see Chap-
ter 7, "How to Perform Measurements in the I/Q Analyzer Application" , on page 95.
Preset Channel Setup
Select the "Preset Channel" button in the lower left-hand corner of the "Overview" to
restore all measurement settings
in the current channel setup to their default values.
Do not confuse the "Preset Channel" button with the [Preset] key , which restores the
entire instrument to its default values and thus closes all channel setups on the
R&S ZNL (except for the default channel setup)!
Remote command:
SYSTem:PRESet:CHANnel[:EXEC]
on page 108
Specifics for
The channel setup may contain several windows for different results. Thus, the settings
indicated in the "Overview" and configured in the dialog boxes vary depending on the
selected window.
Select an active window from the "Specifics for" selection list that is displayed in the
"Overview" and in all window-specific configuration dialog boxes.
The "Overview" and dialog boxes are updated to indicate the settings for the selected
window.
5.2 Import/Export Functions
Access : "Save"/ "Open" icon in the toolbar > "Import" / "Export"
The R&S ZNL provides various evaluation methods for the results of the performed
measurements. However, you may want to evaluate the data with further, external
applications. In this case, you can export the measurement data to a standard format
file (ASCII or XML). Some of the data stored in these formats can also be re-imported
to the R&S
ZNL for further evaluation later, for example in other applications.
The following data types can be exported (depending on the application):
●
Trace data
●
Table results, such as result summaries, marker peak lists etc.
Import/Export Functions