Rohde & Schwarz ZNL Series, User Manual

Page: 27 / 240

Configuration
R&S
®
ZNL
27 User Manual 1178.5989.02 ─ 06
5 Configuration
Access : [MODE] > "I/Q Analyzer"
The I/Q Analyzer is a special application on the R&S ZNL.
For details see the "Operating Modes, Applications, Channel Setups, and Result Dis-
plays" chapter in the R&S
ZNL User Manual.
When you switch to an I/Q Analyzer channel setup the first time, a set of parameters is
passed on from the currently active application. After initial setup, the parameters for
the channel setup are stored upon exiting and restored upon re-entering the channel
setup. Thus, you can switch between applications quickly and easily.
When you activate a channel setup for the I/Q Analyzer application, data acquisition
from the input signal is started automatically with the default configuration. The "I/Q
Analyzer" menu is displayed and provides access to the most important configuration
functions.
The remote commands required to perform these tasks are described in Chapter 9,
"Remote Commands to Perform Measurements with I/Q Data" , on page 99.
Importing and Exporting I/Q Data
The I/Q data to be evaluated in the I/Q Analyzer application can not only be captured
by the I/Q Analyzer itself, it can also be imported to the R&S
ZNL, provided it has the
correct format. Furthermore, the captured I/Q data from the I/Q Analyzer can be expor-
ted for further analysis in external applications.
For details see
Chapter 4.4, "I/Q Data Import and Export" , on page 26.
● Configuration Overview ...........................................................................................27
● Import/Export Functions ..........................................................................................29
● Receiving Data Input and Providing Data Output ................................................... 32
● Amplitude ................................................................................................................ 41
● Frequency Settings ................................................................................................. 46
● Trigger Settings .......................................................................................................47
● Data Acquisition and Bandwidth Settings ............................................................... 51
● Display Configuration ..............................................................................................57
● Adjusting Settings Automatically .............................................................................57
5.1 Configuration Overview
Access : all menus
Throughout the channel setup configuration, an overview of the most important cur-
rently defined settings is provided in the "Overview".
Configuration Overview