Rohde & Schwarz R&S CMW-KM300, User Manual

Page: 156 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
156 User Manual 1178.5689.02 ─ 06
Manual operation: See "Integrity Algorithm" on page 67
CONFigure:NIOT:SIGN<i>:CELL:SECurity:SKEY <SecretKey>
Defines the secret key K as 32-digit hexadecimal number. You can omit leading zeros.
K is used for the authentication procedure including a possible integrity check.
Parameters:
<SecretKey> Range: #H0 to
#HFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
*RST: #H000102030405060708090A0B0C0D0E0F
Example: See Configuring Network Settings
Firmware/Software: V3.7.20
Manual operation: See "Secret Key" on page 67
CONFigure:NIOT:SIGN<i>:CELL:SECurity:MILenage <Enable>
Enables or disables using the MILENAGE algorithm set instead of the standard algo-
rithms.
Parameters:
<Enable> OFF | ON
*RST:
OFF
Example: See Configuring Network Settings
Firmware/Software: V3.7.20
Manual operation: See "Milenage" on page 68
CONFigure:NIOT:SIGN<i>:CELL:SECurity:OPC <OPC>
Specifies the key OP
c
as 32-digit hexadecimal number.
Parameters:
<OPC> Range: #H00000000000000000000000000000000 to
#HFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
*RST: #H00000000000000000000000000000000
Example: See Configuring Network Settings
Firmware/Software: V3.7.20
Manual operation: See "OPc" on page 68
2.5.11.5 UE Identity
The following command configures the default IMSI.
Command Reference
深圳德标仪器
135-1095-0799