NB-IoT Multi-Evaluation Measurement
R&S
®
CMW-KM300/-KS300
269
User Manual 1178.5689.02 ─ 06
FETCh:NIOT:MEAS<i>:MEValuation:STATe?
Queries the main measurement state. Use
FETCh:...:STATe:ALL?
to query the
measurement state including the substates. Use
INITiate..., STOP...,
ABORt...
to change the measurement state.
Return values:
<MeasStatus>
OFF | RUN | RDY
OFF:
measurement off, no resources allocated, no results
RUN:
measurement running, synchronization pending or adjus-
ted, resources active or queued
RDY:
measurement terminated, valid results can be available
*RST:
OFF
Usage:
Query only
Firmware/Software:
V3.5.10
Manual operation:
See
FETCh:NIOT:MEAS<i>:MEValuation:STATe:ALL?
Queries the main measurement state and the measurement substates. Both measure-
ment substates are relevant for running measurements only. Use
FETCh:...:STATe?
to query the main measurement state only. Use
INITiate..., STOP...,
ABORt...
to change the measurement state.
Return values:
<MainState>
OFF | RUN | RDY
OFF:
measurement off, no resources allocated, no results
RUN:
measurement running, synchronization pending or adjus-
ted, resources active or queued
RDY:
measurement terminated, valid results can be available
*RST:
OFF
<SyncState>
PEND | ADJ | INV
PEND:
waiting for resource allocation, adjustment, hardware
switching ("pending")
ADJ:
adjustments finished, measurement running ("adjusted")
INV:
not applicable, <MainState> OFF or RDY ("invalid")
<ResourceState>
QUE | ACT | INV
QUE:
measurement without resources, no results available
("queued")
ACT:
resources allocated, acquisition of results in progress but
not complete ("active")
INV:
not applicable, <MainState> OFF or RDY ("invalid")
Usage:
Query only
Firmware/Software:
V3.5.10
Manual operation:
See
Command Reference
深圳德标仪器
135-1095-0799
