Rohde & Schwarz R&S CMW-KM300, User Manual

Page: 34 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
34 User Manual 1178.5689.02 ─ 06
● Connection Status ...................................................................................................34
● Event Log ................................................................................................................34
● UE Info .................................................................................................................... 35
● UE Capabilities ........................................................................................................36
● Settings ................................................................................................................... 41
2.3.1.1 Connection Status
Access: NB-IoT signaling main view > "Connection Status" pane.
The connection status pane displays the following information.
Figure 2-7: Connection status pane of the main view
For background information about the displayed states, see Chapter 2.2.4, "Connec-
tion States" , on page 16.
For control of the states, see Chapter 2.3.2, "Signaling Control" , on page 42.
Cell
Displays the current state (or state transition) of the downlink signal generator.
Remote command:
SOURce:NIOT:SIGN<i>:CELL:STATe
Packet Switched
Displays the current state or state transition of the packet-switched network domain.
Remote command:
FETCh:NIOT:SIGN<i>:PSWitched:STATe?
RRC State
Indicates whether an RRC connection is established ("Connected") or not ("Idle").
Remote command:
SENSe:NIOT:SIGN<i>:RRCState?
2.3.1.2 Event Log
Access: NB-IoT signaling main view > "Event Log" pane.
The event log pane reports events and errors like PS connection state changes and
RRC connection establishment/release.
The button to the right clears the displayed event entries.
GUI Reference
深圳德标仪器
135-1095-0799