Rohde & Schwarz R&S CMW-KM300, User Manual

Page: 141 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
141 User Manual 1178.5689.02 ─ 06
Example: See Configuring DL Power Levels
Firmware/Software: V3.7.20
Manual operation: See "NRS EPRE" on page 55
CONFigure:NIOT:SIGN<i>:DL:OCNG <OCNG>
Enables or disables the OFDMA channel noise generator (OCNG).
Parameters:
<OCNG> OFF | ON
*RST:
OFF
Example: See Configuring DL Power Levels
Firmware/Software: V3.7.20
Manual operation: See "OCNG" on page 55
CONFigure:NIOT:SIGN<i>:DL:AWGN <AWGN>
Specifies the total level of the additional white Gaussian noise (AWGN) interferer. The
unit dBm/15 kHz indicates the spectral density integrated across one subcarrier.
The range depends on several parameters. It is a subset of the range of the RS EPRE.
Parameters:
<AWGN> Range: depends on many parameters
*RST: -98 dBm/15kHz, OFF
Default unit: dBm/15kHz
Additional parameters: OFF | ON (disables | enables the AWGN
interferer)
Example: See Configuring DL Power Levels
Firmware/Software: V3.7.30
Manual operation: See "AWGN" on page 55
2.5.9 Uplink Power Control
The following commands define parameters related to UE uplink power control by the
instrument.
2.5.9.1 General Power Control Parameters
The following commands are related to the parameters at the highest level of the
"Uplink Power Control" section.
Command Reference
深圳德标仪器
135-1095-0799