Rohde & Schwarz R&S CMW-KM300, User Manual

Page: 75 / 388

NB-IoT Signaling
R&S
®
CMW-KM300/-KS300
75 User Manual 1178.5689.02 ─ 06
"User defined" User-defined scheduling, with configurable DL/UL pattern.
For configuration, see
Chapter 2.3.11.4, "User-Defined Scheduling
Settings" , on page 77.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:STYPe
2.3.11.2 UL RMC Connection Settings
Access: "Config" hotkey > "Connection" > "UL RMC Scheduling" section.
The parameters in this section configure a 3GPP-conform UL RMC. The settings apply
if
"Scheduling Type" on page 74 = "UL RMC".
The settings are used for NPUSCH format 1. The settings for NPUSCH format 2 are
fixed.
There are dependencies between the settings. Configure the settings from the top to
the bottom.
For valid parameter combinations, see Chapter 2.2.8, "Scheduling Type UL RMC" ,
on page 23.
Figure 2-44: UL RMC connection settings
Subcarriers, Start Subcarrier .........................................................................................75
MCS Index .................................................................................................................... 75
Resource Units ..............................................................................................................75
Repetitions .................................................................................................................... 76
Subcarriers, Start Subcarrier
Number of scheduled subcarriers and offset of the first scheduled subcarrier from the
edge of the transmission bandwidth.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:RMC:UL
MCS Index
MCS index value. It determines the modulation scheme and the transport block size,
which are displayed for information.
Remote command:
CONFigure:NIOT:SIGN<i>:CONNection:RMC:UL
CONFigure:NIOT:SIGN<i>:CONNection:RMC:UL:MCSindex?
Resource Units
Number of resource units.
GUI Reference
深圳德标仪器
135-1095-0799