TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 84 / 290
To activate it, fist, select either
Allow
, or
Den
y, then define the addresses which will be permitted,
respectively rejected.
You can add as many records as you like in this table, but bear in mind that the rule you choose (either
Accept them or Deny these MACs) will apply
for al physical addresses and IP addresses in the lis
t!
Figure 5-34: Defining MAC entries in the table “Filter List MAC”.
IP
– it establishes a fixed IP address for the respective MAC source.
When you choose
Allow,
and type a value in the field ”IP” , the client with the respective MAC will get the
corresponding IP address, like the 10.0.0.17 as shown the example above.
Instead of a dynamic address, assigned by DHCP, he will always have the same address that you
establish here.
