TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 31 / 290
A group of four female metallic RJ45 connectors for Ethernet network connections, with different
assignments:
The first (rightmost) female metallic RJ45 connector (
labeled WAN)
is for the external
network
The two
leftmost ones
(labeled LAN1, LAN2)
are in a physical switch, and logically they are
in a bridge with the wireless local network (Wi-Fi). These two ports can be also assigned
individual IP addresses.
The middle connector
(labeled respectively WAN 0/LAN 0)
may be configured from
the
Web configuration pages, according to your requirements. As its name suggests, the either to
a second external, Wide Area Network, or to the switch for the local network (LAN);
All four ETH connectors include yellow and green indicator LEDs.
the black Reset button, recessed (
labeled RST
)
below it, the Power LED, of green color
Towards the right edge, the round connector for the power supply jack, (labeled
PWR)
(12V
DC
) .
Antenna Diversity Variants
The versions of Bytton LTE equipment for antenna diversity or MIMO (multiple input/output) feature two
antenna connectors (labeled MAIN and respectively AUX) for the Mobile network and / or for the Wi-Fi
access point.
As can be seen, these multiple-antenna variants have no room on the front panel for SER, USB or FXS
connectors!
