TOPEX Bytton (HSPA+ / LTE)
ByttonLTE(full)_genericUsermanual_sw306FAS_revN.1.docx
Page: 244 / 290
The outgoing mail server (SMTP) must
have as IP address the WAN address of
the Bytton equipment, in this case
192.168.144.72
No password is used, the field is empty,
but it must be completed, for compatibility
Finally, the number of the server port
for outgoing mail must be set to the
same value as the one used by Byttpn,
in this case “100001”
Figure 5-204:
Configure the E-mail to SMS feature of Bytton
.
Use the respective e-mail accont (
) to create the message that you want to be relayed by
Bytton, as shown in the example below:
The “To:” field must contain the destination telephone number, such as 0732056277 in this example. For
compatibility, the entry in “To” must be structured like a correct e-maill address, that is
